Programmable power valve (
exhaust valve ) controller
PPV-RZ3
Support 5 wire
servos.
Supported bikes:
Yamaha:
RZ350YPVS, RD/RZ500, TZR250 2ma, TZR250 3ma, DT125R, DTR125
Suzuki:
RGV250
Honda: CR250R
Aprilia: RS250
Bimota: Vdue
Technical data:
-
minimum revs 200 RPM
-
maximum revs 20000 RPM
-
minimum supply voltage 8 Volts
-
maximum supply voltage 20 Volts
-
current draw 30mA
-
max. supply voltage for 1 minute 40 Volts
- dimensions (LxWxH) 72x50x27mm
Circuit is protected against reverse supply voltage
(wrong connection).
Features:
- ten custom programmable curves
- store and load function for ten custom curves
- easy and fast programming on the field, via
handheld programmer
- programming while machine running - you can
immediately see effects
- each curve can be set with 2 to 8 curve points
-
each curve point can be programmed with 100rpm
steps and servo positions from 0% to 100% with 1%
steps
- programmable deviation from 2% to 20% with 1%
steps
- programmable max close and max open positions with
1000 steps through whole servo range
- instant monitoring of valve position, via LCD
(handheld programmer)
- fast processing for high accuracy
- self test on power-up
- error detecting (position sensor failure, servo
motor failure)
- short connection on servo motor output, can't
damage controller
PV curve example:
PPV-RZ3 Programming Manual
for handheld programmer
PPV-RZ3 Programming Manual
for ZeelProg
ZeelProg
PPV-RZ3
PPV-RZ3 wiring diagram RZ/RD350/500
PPV-RZ3 wiring
diagram RGV250
PPV-RZ3 wiring
diagram RS250
PPV-RZ3 wiring
diagram DT125R
PPV-RZ3 wiring
diagram CR250R
PPV-RZ3
wiring
diagram Bimota Vdue
PPV-RZ3 wiring
diagram TZR250 1KT/2MA
Anleitung PPV-RZ
Manuel d'utilisation PPV-RZ
|