|
PDCIS-11T
- single channel programmable DC-CDI
...programmable with
Handheld
Programmer and
PC
Supported bikes:
- single cylinder, or twin wasted spark
engines
Technical data:
- minimum revs 200RPM
- maximum revs 20000RPM
- minimum supply voltage 7 Volts
- maximum supply voltage 18 Volts
- recommended power supply from 12 to 15Volts
- stand-by current draw < 0.09 Amp
- current draw at 1300RPM < 0.15 Amp
- current draw at 12000RPM < 1 Amp
- maximum continuous current for shift light and
power jet output 1 Amp
- peak current for shift light and power jet output
5 Amp
- constant spark energy from idle to 11000RPM >51mJ
- spark energy at 15000RPM >38mJ
- spark energy at 20000RPM >30mJ
Circuit is protected against reverse supply voltage
(wrong connection).
Features:
- fast power-up (also starts only with condenser)
- full power starting spark energy already at 7Volts
power supply
- one isolated input (pickup)
- one ignition coil output
- external switch for changing ignition map while
riding
- TPS input (Throttle Position Sensor)
- shift light output
- 2 power jet outputs, one is with duty cycle (pulsed)
operation for A/F ratio regulation
- quick shift (shift kill)
- soft rev limit (three stage rev limit)
- reduced number of sparks at high revs with closed throttle (TCT
mode)
- tachometer output
- easy and fast programming on the field, via hand
held programmer
- programming while machine running - you can
immediately see effects
- each curve can be set in 4 to 12 curve points
- 3D interpolated ignition map, if TPS selected
- signal delay compensation
- instant monitoring of rev's and angle, via
LCD(hand held programmer)
- fast processing for high accuracy - delays from
1us
- timing calculation for every 1 RPM change (1000,
1002, .. , 9805, 9806, ...)
Download:
PDCIS-11T programming manual for handheld programmer
PDCIS-11T programming manual for ZeelProg
PDCIS-11T wiring diagram
ZeelProg PDCIS-11T
|
